Vaisala DRYCAP DMT340 SERIES Guia do Utilizador descarregar pdf (Página 98)

USER'S GUIDE____________________________________________________________________

98 __________________________________________________________________ M210704EN-E

g/kg Tw= 15.6 'C ppm= 11980 pw= 12.00 hPa pws= 29.91 hPa

h= 43.2 kJ/kg

>purge

Purge started, press any key to abort.

>send

S 134 RH= 40.2 %RH T= 24.1 'C Td= 9.8 'C Tdf= 9.8 'C a=

8.8 g/m3 x= 7.5

g/kg Tw= 15.7 'C ppm= 12084 pw= 12.10 hPa pws= 30.11 hPa

h= 43.5 kJ/kg

Where the state of the probe is indicated by the following letters and

values:

N...xxx = Normal operation where xxx = Probe heat power

H...xxx = Purge where xxx = Sensor temperature (ºC)

S...xxx = Sensor cooling

after purge

where xxx = Sensor temperature (ºC)

A...xxx = AutoCal where xxx = Sensor temperature (ºC)

w...xxx = Sensor warming where xxx = Sensor heat power

See section General Settings on page 98 for a description of the other

serial commands.

General Settings

Changing the Quantities and Units

To change quantities and units use serial commands or the optional

display/keypad. See Table 3 on page 19 for available quantities and

Table 4 on page 20 for optional quantities.

NOTE

Only the quantities selected when ordering the device can be selected as

an output quantity.

Using Display/Keypad

Use display/keypad to select the display output quantities.

1. Press any of the arrow buttons to open the MAIN MENU.

2. Press the ► arrow button to select Display.

3. Press ► arrow button to select Quantities.

4. Select the quantity by using the ▲▼ arrow buttons. Confirm the

selection by pressing SELECT. You can select 1 ... 3 display

quantities at a time.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 168 169

Sem comentários

Vaisala DRYCAP DMT340 SERIES Guia do Utilizador Página 98