Vaisala DRYCAP DMT340 SERIES Guia do Utilizador Página 62
- Página / 169
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
USER'S GUIDE____________________________________________________________________
62 __________________________________________________________________ M210704EN-E
RS-422/485 Interface
0503-029
Figure 41 RS-485-Module
Numbers refer to Figure 41 above:
1 = Flat cable pins
2 = Selection switches
3 = Screw terminals for wiring
NOTE
The markings on the module and in this manual are according to the line
driver manufacturers’ application notes, where A is posive against B
when measured with a voltmeter.
When connecting the module, be prepared to swap the A and B wires if
you have a communication problem.
Installation and Wiring
1. Disconnect the power. In case the RS-485-module is installed in
the factory, continue with the item 4.
2. To attach the module, open the transmitter cover and fasten the RS-
485 module to the bottom of the housing with four screws.
3. Connect the flat cable between the RS-485 module and the
motherboard's pins MODULE1 (Communications).
4. Pull the network wirings through the cable gland.
5. Connect the twisted pair wires (1 or 2 pairs) to the screw terminals
as presented in Table 6:
- USER'S GUIDE 1
- Table of Contents 3
- CHAPTER 5 6
- CHAPTER 6 6
- CHAPTER 7 7
- APPENDIX A 7
- List of Figures 9
- List of Tables 11
- GENERAL INFORMATION 13
- Version Information 14
- Feedback 14
- Recycling 15
- Regulatory Compliances 16
- Patent Notice 17
- Trademarks 17
- License Agreement 18
- Warranty 18
- PRODUCT OVERVIEW 19
- Basic Features and Options 20
- Structure of the Transmitter 21
- 0604-006 22
- INSTALLATION 25
- 0503-004 26
- 0804-065 26
- 0503-002 28
- Installation Kit 30
- Panel Mounting Frame 30
- 0704-002 31
- 0804-083 31
- Grounding the Cables 33
- 0605-028 34
- Probe Mounting 36
- Use with Sampling Cell 37
- CAUTION 38
- 0506-029 39
- 0503-034 40
- 0503-033 40
- 0503-021 42
- Standard 178 mm 120 mm 44
- Optional 400 mm 340 mm 44
- Tightening the Clasp Nut 45
- 0507-043 47
- Leak Screw Installation 49
- Process 50
- 0706-001 51
- 0503-022 53
- WARNING 55
- Warnings 55
- Installation 55
- Third Analog Output 59
- Alarm Relays 60
- RS-422/485 Interface 62
- LAN Interface 64
- WLAN Interface 65
- 0706-068 68
- OPERATION 71
- Graphic History 72
- 0706-030 73
- Changing the Language 75
- Rounding Setting 76
- Display Backlight Setting 76
- Display Contrast Setting 76
- Keypad Lock (Keyguard) 76
- Factory Settings 77
- Display Alarms 78
- 0802-069 79
- 0802-070 79
- Serial Line Communication 80
- User Port Connection 81
- Service Port Connection 82
- Using the Service Port 83
- LAN Communication 84
- Wireless LAN Configuration 87
- 0802-111 88
- 0802-110 88
- 0802-112 88
- Terminal Program Settings 91
- 0810-070 92
- List of Serial Commands 94
- Serial Line 96
- FTIME and FDATE 97
- General Settings 98
- Using Display/Keypad 101
- Using Serial Line 102
- Date and Time 103
- User Port Serial Settings 104
- Data Filtering 106
- Device Information 107
- Data Recording 111
- Analog Output Settings 114
- 0503-045 115
- AMODE/ASEL 117
- Analog Output Tests 118
- Operation of Relays 120
- Hysteresis 121
- 0610-077 123
- Networking Commands 127
- Sensor Functions 130
- Sensor Purge 131
- Manual Sensor Purge 132
- Interval Purge 132
- Power-up Purge 133
- Sensor Warming 134
- MAINTENANCE 135
- Error States 136
- Table 30 Error Messages 137
- Technical Support 138
- Return Instructions 138
- Vaisala Service Centers 139
- CALIBRATION AND ADJUSTMENT 141
- Adjustment Information 143
- Adjusting Dewpoint T 144
- 0706-020 145
- 0706-021 145
- 0706-022 145
- 0706-023 145
- 0706-024 147
- 0706-025 147
- 0706-026 147
- Adjusting Temperature 149
- Adjusting Analog Outputs 151
- TECHNICAL DATA 153
- Operating Environment 154
- Inputs and Outputs 154
- Mechanics 155
- Probe Specifications 155
- Modules 156
- RS-485 Module 157
- LAN Interface Module 157
- WLAN Interface Module 157
- Data Logger Module 157
- Options and Accessories 158
- Dimensions (mm/inch) 160
- 0804-035 161
- 0506-034 161
- 0804-129 163
- 0704-054 163
- CALCULATION FORMULAS 165
- 68.216 166
Manuais e produtos relacionados com Medição, teste e controlo Vaisala DRYCAP DMT340 SERIES
Medição, teste e controlo Vaisala HMP60 Manual
(26 páginas)
(26 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.052 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais