Vaisala DRYCAP DMT340 SERIES Guia do Utilizador descarregar pdf (Página 96)

USER'S GUIDE____________________________________________________________________

96 __________________________________________________________________ M210704EN-E

Command Description

XPRES Set pressure (temporarily)

MOL/MOLI View/set molecular weight parameter

Getting the Measurement Message from

Serial Line

Starting Continuous Outputting

Enter the R command to start the continuous output of measurements.

Example:

Tdf=-20.6 'C H2O= 958 ppmV x= 0.6 g/kg

Tdf=-20.7 'C H2O= 958 ppmV T= 23.8 'C RH= 3.3 %RH

If a value is too long to fit to the allocated space in the output, or if there

is an error in outputting the quantity, the value is displayed with stars ‘*’.

You can change the format of the output with the following commands:

- Outputting interval can be changed with the INTV command.

- Output message format can be changed with the FORM command.

- Status of purge, sensor warming and AutoCal can be added with the

FST command.

- Date and time information can be added with commands FDATE and

FTIME

Stopping Continuous Outputting

Use the S command to end the RUN mode. After this command all other

commands can be used. You can also press the Esc button or reset the

transmitter to stop the outputting.

See command SMODE to change the default (power-up) operation

mode.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 168 169

Sem comentários

Vaisala DRYCAP DMT340 SERIES Guia do Utilizador Página 96