Vaisala BAROCAP PTB330 Guia do Utilizador Página 68

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 138
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 67
User's Guide ______________________________________________________________________
66 __________________________________________________________________ M210855EN-C
Analog Output Settings
Analog Output Quantities
Use the display/keypad to change and scale the analog output quantities.
1. Press any of the arrow buttons to open the MAIN MENU.
2. Select Interfaces and press the right arrow button.
3. Select Analog outputs and press the right arrow button.
4. Select Output 1(P) and press the right arrow button.
5. Select Quantity and press the CHANGE button.
6. Select the quantity by using the up/down arrow buttons. Press the
SELECT button to confirm your selection.
7. Select Scale, lower limit, by pressing the up/down arrow buttons.
Press the SET button. Adjust the lower limit value by pressing the
arrow buttons up/down/left/right. Press the OK button to confirm
your setting.
8. Select Scale, upper limit by pressing the up/down arrow buttons.
Press the SET button. Adjust the upper limit value by pressing the
arrow buttons up/down/left/right. Press the OK button to confirm
your setting. Press the EXIT button to return to the basic display.
9. Select Fault Indication and press the SET button. Adjust the
lower limit value by pressing the arrow buttons up/down/left/right.
Press the OK button to confirm your setting. Adjust the upper limit
value by pressing the arrow buttons up/down/left/right. Press the
OK button to confirm your setting. Press the EXIT button to return
to the basic display.
10. Press the EXIT button to return to the basic display.
Testing the Operation of Analog Outputs
Use the display/keypad for testing the operation of the analog outputs
by forcing the outputs to known values. Measure then the outputs with
a current/voltage meter.
1. Press any of the arrow buttons to open the MAIN MENU.
2. Select System and press the right arrow button.
3. Select Diagnostics and press the right arrow button.
Vista de página 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 137 138

Comentários a estes Manuais

Sem comentários