Vaisala HUMICAP DMT132 Guia do Utilizador descarregar pdf (Página 43)

Chapter 4 ________________________________________________________________ Operation

VAISALA _______________________________________________________________________ 41

NOTE

Conversions from mmHg and inHg are defined at 0 °C and from

mmH

O and inH

O at 4 °C.

NOTE

You can also set the pressure compensation value when you connect the

DMT132 to the MI70 indicator. When using the MI70, the pressure unit

is bar

Serial Line Output Commands

Output a Reading Once

Use the SEND command to output a single measurement message. The

output message is sent for the quantity that is currently selected using the

ASEL command.

SEND<cr>

Example:

>send

Tdf= -0.80'C

Troubleshooting and Maintenance Commands

Display Currently Active Errors

Use the ERRS command to display the currently active transmitter error

codes. Possible errors and their causes are listed in Table 8 on page 65.

ERRS<cr>

Example (no errors active):

>errs

No errors

Example (Error E2 active):

>errs

Error: E2 Humidity sensor open circuit/not calibrated

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 73 74

Sem comentários

Vaisala HUMICAP DMT132 Guia do Utilizador Página 43