Vaisala DEWCAP DM500 Guia do Utilizador descarregar pdf (Página 105)

Chapter 16 _____________________________________________________ Serial Line Commands

VAISALA ______________________________________________________________________ 103

The CDP* command displays also the coefficients of the correction

polynomial, as well as the reference value and residual error for each

calibration data point.

Example:

>cdp<cr>

1. reference : -39.99 <cr>

1. measurement : -40.009 <cr>

2. reference : -30.01 <cr>

2. measurement : -30.030 <cr>

3. reference : -20.01 <cr>

3. measurement : -20.026 <cr>

4. reference : -9.98 <cr>

4. measurement : -9.977 <cr>

5. reference : 0 <cr>

5. measurement : -0.006 <cr>

6. reference : 10 <cr>

6. measurement : 10.002 <cr>

7. reference : 19.99 <cr>

7. measurement : 19.982 <cr>

8. reference : 29.98 <cr>

8. measurement : 29.989 <cr>

9. reference : 39.98 <cr>

9. measurement : 39.989 <cr>

10. reference : <cr>

Reference Measurement<cr><lf>

-39.990 -40.009<cr><lf>

-30.010 -30.030<cr><lf>

-20.010 -20.026<cr><lf>

-9.980 -9.977<cr><lf>

0.000 -0.006<cr><lf>

10.000 10.002<cr><lf>

19.990 19.982<cr><lf>

29.980 29.989<cr><lf>

39.980 39.989<cr><lf>

Overwrite previous calibration ? Y/N<cr><lf>

OK<cr><lf>

>cdp *<cr>