Vaisala DRYCAP DM70 Guia do Utilizador descarregar pdf (Página 35)

Chapter 5 _____________________________________________________________ User Interface

3. To change the recording interval, select Interval and press

Set.

4. Select the measurement interval with the arrow buttons. The

measurement intervals and the maximum recording times are

shown in Table 1 on page 33.

Table 1 Measurement Intervals and Maximum

Recording Times

Maximum Recording Time (Memory Full) Measure-ment

Interval

1 quantity 2 quantity 3 quantity

1 s 45 min 22 min 15 min

5 s 3 h 113 min 75 min

15 s 11 h 5 h 3 h

30 s 22 h 11 h 7 h

1 min 45 h 22 h 15 h

5 min 9 days 4 days 3 days

15 min 28 days 14 days 9 days

30 min 56 days 28 days 18 days

1 h 113 days 56 days 37 days

3 h 339 days 169 days 112 days

12 h 1359 days 678 days 451 days

5. Press Select.

6. To set the duration of the recording, select Duration and then

press Set. Select the duration with the arrow buttons and

press Set.

7. To start recording, select Start/Stop recording, press Start.

If you choose Memory full, you will see the maximum recording

time on the display. You can also delete files to empty the

memory. To accept the maximum recording time, press

Start again.

8. You can switch off DM70 during recording to save the battery.

A message will appear on the display to inform that recording

will continue undisturbed even when the power is turned off. If

the indicator is switched off during recording, the progress bar is

shown on the display every 10 seconds (continuously if the

charger is connected). The bar indicates the amount of recorded

data.

CAUTION

Do not disconnect the probe when the data recording is on, even if

the indicator is turned off. This may cause loss of recorded data.

VAISALA _______________________________________________________________________ 33

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 92 93

Sem comentários

Vaisala DRYCAP DM70 Guia do Utilizador Página 35