Vaisala CARBOCAP GMT220 SERIES Guia do Utilizador Página 14

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 28
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 13
USER'S GUIDE_______________________________________________________________________
12 ___________________________________________________________________ M010022EN-C
Calibration
Comparison with the calibrated probe
It is recommended to check the calibration of the GMT220 every
second year. A simple field calibration checking can be performed by
using a calibrated reference probe. During the checking procedure,
please avoid exhaling towards the probe as this alters the CO
2
concentration.
1. Check the current transmitter reading.
2. Replace the probe with the reference.
3. Let the transmitter stabilize for a few minutes. The measured CO
2
concentration near by the transmitter may have increased due to
breathing.
4. Compare the readings measured with the original and the
reference probe.
The difference between the readings should be less than 5 % of the
full scale reading of the GMT220. If there is need for an adjustment of
the probe, please contact Vaisala SSD Service or Vaisala's
representative (see page 14).
On-site checking and adjusting by using a
reference gas and GM70 hand-held meter
A probe to be checked can be flushed in a reference gas by using a
field check adapter (optional part, 26150GM). The procedure requires
pressurized gas bottle giving a flow rate of 0.4...1.0 l/min through the
adapter chamber. If an adjustment is needed, it can be carried out by a
user with a Vaisala's hand-held carbon dioxide meter GM70. Probes
can be sent also to Vaisala SSD Service Centers (see page 14) to be
calibrated.
Calibrator GMK220
The Vaisala GMK220 calibrator is intended for spot checking and
two-point calibration of the GMT220-series probes. The calibration
parameters are stored to the nonvolatile memory of the probes.
Contact Vaisala's representative to get more information about the
GMK220.
Vista de página 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comentários a estes Manuais

Sem comentários